Microsoft XBOX to a wireless network

 Microsoft XBOX to a wireless network  

1. To open the management console, type http://192.168.1.1 into the address bar of your web browser.
2. Enter the router username and password. If the username and password has never been changed, then the default login is:
1. Username: admin
2. Password: password
3. Select Wireless Settings from the router console. Write down the SSID and WEP key (they'll be needed later).

Note: Before a computer can connect to the router through a wireless signal, it must be configured with the appropriate SSID and WEP key.

4. From the Xbox Dashboard, select Settings and then select Network Settings.
5. Click Advanced, and then click Wireless.
6. From the Wireless Status screen, select Settings.
7. The router can be configured to either broadcast or not broadcast its SSID.
1. If your router is configured to broadcast its SSID
   From the list of SSIDs in the Select Network screen, select the SSID that you wrote down in step 3.
2. If your router is not configured to broadcast its SSID
   Select OTHER from the list on the Select Network screen. Then use the Xbox Dashboard virtual keyboard to enter the SSID that you wrote down in step 3.
8. From the Wireless Settings screen, select Network Mode as Infrastructure. Then select Security Type and configure the Xbox Compatible wireless bridge with the same security settings (NONE, 64-bit WEP, or 128-bit WEP) as the wireless router.
9. Press A to save the new settings, and then press B to go back.
10. From the Wireless Status screen, check that your Xbox console is connected to the network name (SSID) specified in step 3. Press B twice to go back.
11. From the Network Settings screen, select Connect.
12. From the Connect Status screen, verify that the Xbox console is connected.